The Impact Sports Standard Golf Simulator Enclosure is a complete, padded bungee enclosure system built around a high-density impact screen. Made by Impact Sports, it gives you the screen, the roof and side walls, the pole frame, the pole padding and the bungee system in one kit, so the hitting bay is fully contained from the first swing.
It is designed for golfers building a home simulator bay in a garage, basement or spare room, as well as for coaching studios, academies and facilities that need a straightforward enclosure that goes up without a construction crew. Six sizes cover everything from a compact 8'2" wide bay to a full 13'1" wide, 9'10" deep enclosure, so you can match the frame to the room rather than the room to the frame.
What sets the Impact Sports Standard Golf Simulator Enclosure apart is how complete it is. The blackout roof and side walls wrap the bay, high-density foam padding covers the interior poles to cut bounce-back, and the ball bungees that tension the screen are included rather than sold as an add-on.
What's Included:
High-Density Impact Screen
The front of the enclosure is a high-density white impact screen that takes real golf ball strikes and doubles as your projection surface.
Bright, Full-Screen Projection
The white screen face gives a front or rear projector a clean, bright surface for course and range imagery, and the black surround frames it on every side.
Blackout Roof and Side Walls
The blackout roof and side wall panels close the bay above and on both sides, so shanks, tops and skied shots stay inside the hitting area instead of traveling across the room.
Less Ambient Light on the Screen
Because those panels are blackout rather than open netting, they keep room light off the projection surface and hold the picture cleaner in a bright garage or basement.
High-Density Foam Pole Padding
The pole frame carries the screen and the surround, and high-density foam padding covers the interior poles so an errant ball meets padding rather than a bare pole.
Numbered Poles and Push-Fit Connectors
Every pole in the kit is numbered and the frame joins with push-fit corner connectors, which keeps the build sequence easy to follow.
Bungee Tensioning Included
Ball bungees thread through the grommets in the screen's reinforced black border and pull it tight to the frame, and they ship with the enclosure rather than as a separate add-on.
Re-Tension the Screen Over Time
The bungee system is adjustable, so you can pull the screen back to full tension as it settles in with use.
Six Sizes to Fit the Room
Choose from six width, depth and height combinations, from a compact 8'2" x 4'11" x 8'2" bay up to a 13'1" x 9'10" x 9'10" enclosure with a much deeper footprint.
Launch Monitor and Projector Ready
Impact Sports builds the Standard enclosure to work with a golf launch monitor and either a front or a rear projector, so it drops into an existing simulator plan.
Simple Assembly
The enclosure is a pole-and-bungee system: build the pole frame, add the pole padding, then bungee the roof, side walls and impact screen to the frame.
Included with your purchase:
Q: How much ceiling height do I need?
A: Your ceiling must clear the enclosure height of the size you choose (8' to 9'10" depending on the variant), with a few inches of buffer above the frame for assembly. Also make sure you can swing a driver freely in front of the screen; many golfers want 9' or more of ceiling regardless of the enclosure size.
Q: What is included, and what do I still need?
A: The kit includes the impact screen, roof and side walls, pole system, pole padding and bungee system. A launch monitor, projector, hitting mat, simulator software and turf are not included and are sold separately.
Q: How long does it take to ship?
A: The Impact Sports Standard Golf Simulator Enclosure is stocked in Impact Sports' U.S. warehouse and typically ships within 5 to 7 business days.
Q: Can I project onto the impact screen?
A: Yes. The white impact screen is designed to be hit into and projected onto, so it serves as both your ball-stop and your simulator display, and Impact Sports builds the enclosure for either a front or a rear projector.
Q: Are bungees included?
A: Yes. The bungee system that tensions the screen and surround to the pole frame ships with the Impact Sports Standard Golf Simulator Enclosure, and because it is adjustable you can re-tighten the screen as it settles.
Q: How hard is it to assemble?
A: The enclosure is a pole-and-bungee system: build the pole frame from the numbered poles and push-fit connectors, add the pole padding, then attach the roof, side walls and impact screen with the ball bungees. Two people make it easier for the larger sizes.
Q: Which size should I choose?
A: Measure your room width, depth and ceiling height first, then pick the largest enclosure that fits with clearance on all sides. The 4'11" deep sizes suit tighter rooms; the 13'1" x 9'10" x 9'10" size adds a much deeper footprint for bigger bays.
Q: Will it work in a garage or basement?
A: Yes. Impact Sports designs the Standard enclosure for garages, basements and golf rooms as well as for coaching studios, academies and simulator businesses, provided the room clears the height and width of the size you order.
We understand that designing the perfect golf simulator can be a complex task. Get in touch with one of our Golf Simulator Experts for a free consultation, or to address any questions that you might have.
