Uneekor EYE XO2 All-In Golf Simulator Package

Carl's Place Safety Baffle attached to Carl's Place Golf Simulator Enclosure Kit.
Safety Baffle (variant name) Learn More
$34.00
Carl's Place Safety Baffle attached to Carl's Place Golf Simulator Enclosure Kit.

For a limited time, receive 15% OFF the Carl's Place Safety Baffle for DIY Golf Simulator Enclosure Kit (Through November 23rd).

Carl's Place Safety Baffles protect the ceiling of your simulator enclosure while hitting higher shots. They are positioned across the width of your simulator enclosure on the ceiling and hang downward to catch and deflect high-angle shots that may bounce off the simulator screen.

This product is an accessory for the Carl's Place C-Series DIY Simulator Enclosure Kit with Impact Screen.

When purchasing this product, ensure that the width size you select matches the width size of your DIY Golf Simulator Enclosure Kit. If you do not own a Carl's Place Enclosure, please be aware that the Safety Baffle will be approximately 11" shorter than the listed length.

Go to Product Page
Carl's Place Back Cover Kit highlighted on a DIY Golf Simulator Enclosure Kit.
Back Cover Kit (variant name) Learn More
$199.75
Carl's Place Back Cover Kit highlighted on a DIY Golf Simulator Enclosure Kit.

For a limited time, receive 15% OFF the Carl's Place Back Cover Kit for DIY Golf Simulator Enclosure (Through November 23rd).

Carl's Place Back Cover Kit protects from any intruding light on the rear portion of your C-Series DIY Simulator Enclosure. The Back Cover Kit ensures that you will achieve the highest projected image quality while also providing your simulator enclosure with a polished appearance so none of the rear framing is exposed.

Please Note: This product is an accessory only to be used on the Carl's Place C-Series DIY Simulator Enclosure Kit. The Back Cover Kit is NOT a full enclosure tent to be used to create an enclosure from scratch. When purchasing this product, ensure that the size you select matches the size of your DIY Simulator Enclosure.

Go to Product Page
Carl's Place Back Cover Pipe Kit and Back Cover highlighted on a DIY Golf Simulator Enclosure.
Back Cover Pipe Kit (variant name) Learn More
$139.50
Carl's Place Back Cover Pipe Kit and Back Cover highlighted on a DIY Golf Simulator Enclosure.

For a limited time, receive 10% OFF the Carl's Place Back Cover Pipe Kit for DIY Golf Simulator Enclosure (Through November 23rd).

Carl's Place Back Cover Pipe Kit provides for a hassle free setup of your Back Cover Kit for your DIY Golf Simulator Enclosure. The Back Cover Pipe Kit contains framing that is designed to perfectly match the various sizes of the Back Cover Kit for the DIY Golf Simulator Enclosure.

This product is an accessory for the Carl's Place Back Cover Kit for the DIY Simulator Enclosure.

When purchasing this product, ensure that the size you select matches the size of your Back Cover Kit and DIY Golf Simulator Enclosure.

Go to Product Page
Carl's Place Net Wall Extensions installed on a golf simulator enclosure.
Net Wall Extensions (variant name) Learn More
$102.00
Carl's Place Net Wall Extensions installed on a golf simulator enclosure.

For a limited time, receive 15% OFF the Carl's Place Net Wall Extensions for Golf Simulator Enclosure (Through November 23rd).

Carl's Place Net Wall Extensions provide an additional barrier for errant balls that attempt to leave the hitting area. A set of Net Wall Extensions are highly recommended when friends and family are hitting into the simulator enclosure to ensure that your walls stay undamaged and to add an additional layer of peace of mind for users.

The Net Wall Extensions measure 92" tall for all of the sizes that are offered and are compatible with the Carl's Place C-Series DIY Golf Simulator Enclosure Kit with Impact Screen.

*Every order (Qty 1) includes two Net Wall Extensions (pair).

Go to Product Page
Golf Simulator Design Plans and Consultation blueprint to finished golf room hero.
Golf Simulator Design Plans and Consultation Learn More
$795.00
Golf Simulator Design Plans and Consultation blueprint to finished golf room hero.

The Golf Simulator Design Plans and Consultation service is a one-on-one engagement with Indoor Golf Outlet's design team to plan every component of your custom golf simulator room before a single piece of equipment is ordered. We map your space, recommend the right equipment for your goals and budget, and deliver photorealistic 3D renderings and 2D technical drawings so you can see the finished setup in advance.

Planning a custom golf simulator without professional help means guessing at projector throw distances, screen offsets, and launch monitor placement. Even experienced builders get tripped up by ceiling height tolerances and impact screen clearances. This service takes the guesswork out of the equation so the build is right the first time, whether it is a basement project at home or a multi-bay commercial facility.

The deliverables include a detailed 3D rendering of your room, 2D technical drawings, an itemized equipment recommendation list, and build-ready guidance covering framing, wall protection, electrical placement, and cable routing.

What's Included:

  • One-on-One Design Consultation Call
  • Photorealistic 3D Renderings of Your Room
  • Detailed 2D Technical Floor Plans
  • Custom Equipment Recommendations Sized to Your Space
  • Itemized Equipment Quote with Full Pricing
  • Build-Ready Guidance for Framing, Electrical, and Cable Routing
Go to Product Page
Golf Simulator Installation.
Golf Simulator Installation (variant name) Learn More
$4,999.99
Golf Simulator Installation.

Take all the stress out of golf simulator installation and get it done right the first time. Indoor Golf Outlet coordinates golf simulator installation nationwide through a vetted network of independent professional installers. Whether your space is a basement at home or a bay in a commercial facility, your installer mounts, aligns, and calibrates every component with precision so the room performs the day it is finished.

A professional install is the difference between a setup that just works and one you spend months troubleshooting. Installers in our network handle the entire build start to finish, anywhere in the country, including projector throw alignment, launch monitor positioning, screen tensioning, hitting strip placement, software configuration, and cable management.

Two installation tiers cover most home and commercial builds, and each tier is priced per single bay. The Standard tier covers a standard-size freestanding enclosure with impact screen, with nothing custom-built. The Custom tier covers a Custom - Built-In Screen with Padded Walls, built around your space. Both tiers include a detailed pre-install room layout, on-site system calibration, and a full feature walkthrough before the team leaves your space. Installing more than one bay? We offer multi-bay discounts, so contact us for a custom quote.

What's Included:

  • Two Installation Tiers, Priced Per Bay: Standard ($4,999.99) or Custom ($7,499.99)
  • Pre-Install Room Layout and Design
  • On-Site Assembly and Mounting of All Components
  • Full System Calibration
  • Post-Install Feature Walkthrough
  • Nationwide Installer Coverage
Go to Product Page

Plan it now. Pay on Black Friday.

Book a complimentary consultation for this product or a full setup.

  • Today's price is locked in and can only go down
  • Special Black Friday gifts with your order
  • No deposit and nothing to pay today
American Express Apple Pay Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa
Sellout Risk: High

This product is in high demand and may sell out soon! Complete your purchase to ensure availability.

Fast & Free Shipping

Enjoy fast and free shipping (exclusions apply) on products from leading manufacturers!

Price Match Guarantee

Find a competitor with a lower price and we will match or beat it, no questions asked!

Based in the U.S.A.

Expert level sales and support team proudly based in the U.S.A.

#1 Destination for Indoor Golf

Largest selection of indoor golf equipment from leading manufacturers.

The Uneekor EYE XO2 All-In Golf Simulator Package is a complete, ready-to-play golf simulator built around the Uneekor EYE XO2 Launch Monitor. It brings together a framed enclosure with a premium impact screen, your choice of BenQ AK700ST, AK800ST or AK900ST 4K short throw laser projector with a Crimson ceiling mount with extension bar and 32' AOC locking HDMI 2.1 cable, the 3-month Ultimate Package trial that comes with the launch monitor, your choice of flooring, and an optional simulator computer with a 27" touch screen, so every component is matched to work together.

The Uneekor EYE XO2 is an overhead launch monitor equipped with three high-speed cameras and a hitting zone twice the size of its predecessor, the EYE XO, so left and right handed golfers can play without recalibrating or readjusting the launch monitor. It delivers near-instant ball and club data, VIEW Software (included) offers access to 25 measurable data points, and Club Optix gives you real-time impact zone video. Train with any golf ball of your choice and connect to third-party software including GSPro and E6.

Configure your package in three steps: choose one of six Carl's Place C-Series DIY enclosure sizes (7.7' x 10' up to 9' x 12') or a SIG8, SIG10 or SIG12 enclosure; choose EZTee Hybrid Hitting Turf with a Money Putt Landing Pad or the flush IGO Single-Level Golf Simulator Putting Turf floor; then choose whether to add the SurfThing SG3-5702 Golf Simulator Computer and Touch Screen Guru 27" touch screen.

What's Included:

  • Uneekor EYE XO2 Launch Monitor
  • (2) Uneekor Swing Optix Cameras
  • (2) Tripods
  • 1 Year of AI Trainer (Limited Time Only)
  • Choice of Enclosure: Carl's Place C-Series DIY Golf Simulator Enclosure Kit with Premium Impact Screen (7.7' x 10', 7.7' x 13', 8' x 8', 8' x 10.5', 8.5' x 11.5' or 9' x 12'), or SIG8, SIG10 or SIG12 Golf Simulator Enclosure (Premium)
  • Carl's Place Pipe Framing Kit and Carl's Place Foam Insert Kit (with every Carl's Place enclosure size)
  • Choice of BenQ AK700ST, AK800ST or AK900ST 4K Short Throw Laser Golf Simulator Projector
  • Crimson Projector Ceiling Mount with Extension Bar (6"-11")
  • AOC Locking HDMI 2.1 8K 60Hz Projector Cable (32')
  • 3 Month Ultimate Package Trial
  • Choice of Flooring: EZTee Hybrid Hitting Turf in 5' x 8' or 5' x 10' with Money Putt Landing Pad, or IGO Single-Level Golf Simulator Putting Turf
  • Optional Computer: SurfThing SG3-5702 Golf Simulator Computer with Touch Screen Guru 27" FHD 24/7 Touch Screen Monitor (With Computer option)


Optional Accessories (Not Included):

  • Safety Baffle for Carl's Place DIY Golf Simulator Enclosure (Recommended)
  • Back Cover Kit and Back Cover Pipe Kit for Carl's Place DIY Golf Simulator Enclosure
  • Net Wall Extensions for Golf Simulator Enclosure
  • Gaming PC or Laptop (when No Computer is selected)
  • Golf Simulator Installation


Before purchasing, please view the Specifications tab to confirm that the Overall Enclosure Dimensions for the Enclosure you have selected will be suitable for your space.


Unique Requirements: If you have any unique requirements for your space, please contact sales@indoorgolfoutlet.com and we'll tailor the package to fit.


Please Note: The BenQ AK900ST projector option is backordered until November 30th, 2026, and the BenQ AK800ST projector option is on pre-order until mid-November 2026.

Features

Carl's Place C-Series DIY Enclosure, Fully Framed
Choose from six Carl's Place C-Series DIY sizes, from 7.7' x 10' up to 9' x 12'. Each kit pairs a premium impact screen with a borderless, turf-to-screen bottom edge and light-absorbing BlackStop enclosure fabric that keeps the bay dark for the brightest possible image while catching stray shots.

Carl's Place C-Series DIY golf simulator enclosure with a golf course projected on the premium impact screen.

Pipe Framing Kit and Foam Inserts Included
Every Carl's Place size ships with the matching Pipe Framing Kit, black powder-coated 1" EMT pipe pre-cut to the exact lengths for your enclosure, so there is no pipe cutting and no trip to the hardware store. The size-matched Foam Insert Kit slides in behind the screen flaps to protect the frame from errant shots.

Carl's Place Foam Insert Kit being installed on a DIY golf simulator enclosure frame.

Or Step Up to a SIG Enclosure
Prefer the SIG Signature Series? Choose the SIG8, SIG10 or SIG12 enclosure with the SIGPRO Premium (White) impact screen, color-coded push pin poles and connectors, protective foam padding, a vinyl surround and ball bungees. SIG screens are engineered to handle ball speeds up to 250 MPH with minimal bounce-back.

SIG golf simulator enclosure with SIGPRO Premium impact screen.

Enhanced Hitting Zone Dimensions
The EYE XO2 offers an expanded hitting zone that's twice the size of its predecessor, the EYE XO, making it seamless for both left and right-handed golfers without the need for recalibration or repositioning.

Uneekor EYE XO2 hitting zone.

Instant Data Feedback & Responsiveness
Experience near-instant response times on your impact screen for live ball and club data. VIEW Software (included) offers access to 25 measurable data points with a wide range of shot visualizations.

EYE XO2 VIEW Software user interface.

Club Optix
Discover the power of Club Optix, your gateway to real-time impact zone video. Elevate your swing with unmatched precision and accuracy.

Uneekor EYE XO2 Club Optix impact video.

Swing Optix
Capture footage frame-by-frame to analyze every single detail of your swing. Draw lines to compare your swing positions and learn to really see what you feel.

Uneekor Swing Optix swing analysis.

Power U Report
Access your golfing insights from anywhere with the Power U Report. Review and analyze your shot data history and enhance your practice sessions no matter where you are.

Uneekor EYE XO2 Power U Report user interface.

Third-Party Software Compatibility
The EYE XO2 connects with popular third-party golf software, including GSPro, E6 and more. Add Refine or Refine+ software to unlock 18-hole courses and numerous training modes.

Refine+ Software user interface.

True 4K BenQ AK700ST Short Throw Projector
The BenQ AK700ST is a 4000-lumen, true 4K UHD (3840 x 2160) laser projector built for golf simulation. Its short throw design sits behind the golfer, out of the swing path and without casting shadows, and every blade of grass and terrain detail comes through with 8.3 million pixels. For an even brighter picture, choose the 5000-lumen BenQ AK800ST, or the 6000-lumen BenQ AK900ST with 4-way lens shift for flexible mounting.

BenQ AK700ST 4K detail visibility on a golf simulator screen.

Auto Screen Fit and Golf Mode
Auto Screen Fit detects your impact screen's aspect ratio (16:9, 16:10, 4:3 or 1:1) and fills it at the touch of a button, and BenQ's Golf Mode tunes colors to match real course conditions. With 4000 lumens and a laser light source rated for up to 20,000 hours, the picture stays bright with no lamps to replace.

BenQ AK700ST Auto Screen Fit adjusting the image to a golf simulator impact screen.

Crimson Ceiling Mount with Extension Bar and 32' AOC Locking HDMI 2.1 Cable
The Crimson Projector Ceiling Mount with Extension Bar pairs a 6"-11" drop column, adjustable in 1" increments, with the JR3 universal adapter and holds projectors up to 70 lbs. Built-in roll (±8°), pitch (±15°) and 360° yaw adjustment lets you square the image to the screen, the pre-assembled interface and quick release mechanism make installation and servicing easy, and through-column cable routing keeps wiring out of sight. A 32' AOC locking HDMI 2.1 cable reaches from a ceiling mounted projector back to a PC positioned outside the hitting area. Its fiber-optic core carries up to 8K at 60Hz without signal loss over the run, and the locking connectors keep it seated in the projector.

Crimson Projector Ceiling Mount with Extension Bar and JR3 universal adapter, angled view of the black ceiling mount and drop column.

Flooring Option 1: EZTee Hybrid Hitting Turf and Money Putt Landing Pad
EZTee Hybrid Hitting Turf accepts real tees and all clubs, and comes in 5' x 8' or 5' x 10'. It is paired with a Money Putt Landing Pad, a nylon turf with a 3/8" pile and a 9-10 stimpmeter reading.

Uneekor EYE XO2 All-In Golf Simulator Package installed in a garage with the EZTee Hybrid Hitting Turf and Money Putt Landing Pad flooring option.

Flooring Option 2: IGO Single-Level Golf Simulator Putting Turf
Our turnkey single-level floor: IGO Local Muni Putting Turf over an interlocking 10" x 10" plastic floor tile base, with the IGO Local Muni Hitting Strip set flush into the surface. It is custom-cut to fit your enclosure wall to wall, regulation cups are pre-positioned 12" from the screen and 18" off the centerline, and the tile base reduces impact noise and keeps golf balls from bouncing unpredictably.

Uneekor EYE XO2 All-In Golf Simulator Package in a home golf simulator room with the IGO Single-Level Golf Simulator Putting Turf flooring option and the IGO Local Muni Hitting Strip set flush in the turf.

Optional SurfThing SG3-5702 Golf Simulator Computer
Select With Computer to add the SurfThing SG3-5702, pre-built and tested for simulation with an Ultra 5 225F processor, RTX 5070 12GB graphics, 32GB of DDR5 memory and a 2TB NVMe Gen4 SSD. It ships with Windows 11 Home, WiFi 6E, a wireless keyboard and a wireless mouse.

SurfThing SG3-5702 golf simulator computer angled view.

Touch Screen Guru 27" FHD Touch Screen
The With Computer option also includes the Touch Screen Guru 27" FHD 24/7 touch screen: a 500+ nit, 10-point multi-touch display with anti-glare and anti-fingerprint coatings, rated for continuous 24/7 operation and backed by a 3-year warranty.

Touch Screen Guru FHD 24/7 touch screen monitor front view.

What's Included

Included with Your Purchase:

  • Uneekor EYE XO2 Launch Monitor
  • (2) Uneekor Swing Optix Cameras
  • (2) Tripods
  • 1 Year of AI Trainer (Limited Time Only)
  • Choice of Enclosure: Carl's Place C-Series DIY Golf Simulator Enclosure Kit with Premium Impact Screen (7.7' x 10', 7.7' x 13', 8' x 8', 8' x 10.5', 8.5' x 11.5' or 9' x 12'), or SIG8, SIG10 or SIG12 Golf Simulator Enclosure (Premium)
  • Carl's Place Pipe Framing Kit and Carl's Place Foam Insert Kit (with every Carl's Place enclosure size)
  • Choice of BenQ AK700ST, AK800ST or AK900ST 4K Short Throw Laser Golf Simulator Projector
  • Crimson Projector Ceiling Mount with Extension Bar (6"-11")
  • AOC Locking HDMI 2.1 8K 60Hz Projector Cable (32')
  • 3 Month Ultimate Package Trial
  • Choice of Flooring: EZTee Hybrid Hitting Turf in 5' x 8' or 5' x 10' with Money Putt Landing Pad, or IGO Single-Level Golf Simulator Putting Turf
  • Optional Computer: SurfThing SG3-5702 Golf Simulator Computer with Touch Screen Guru 27" FHD 24/7 Touch Screen Monitor (With Computer option)


Optional Accessories (Not Included):

  • Safety Baffle for Carl's Place DIY Golf Simulator Enclosure (Recommended)
  • Back Cover Kit and Back Cover Pipe Kit for Carl's Place DIY Golf Simulator Enclosure
  • Net Wall Extensions for Golf Simulator Enclosure
  • Gaming PC or Laptop (when No Computer is selected)
  • Golf Simulator Installation

What's Measured

Ball Data Measured:

  • Ball Speed
  • Side & Back Spin
  • Side Angle & Total
  • Launch Angle
  • Angle of Descent/Land Angle
  • Flight Time
  • Distance to Apex
  • Carry, Run, and Total Distance


Club Data Measured:

  • Club Speed
  • Dynamic Loft
  • Angle of Attack
  • Smash Factor
  • Club Path
  • Club Face Angle
  • Club Face to Path
  • Club Lie Angle
  • Club Loft Angle
  • Impact Point Vertical
  • Impact Point Horizontal


*EYE XO2 Club Stickers are required for Club Data Measurement

Specifications

Uneekor EYE XO2 Specifications:

  • EYE XO2 without Bracket: 36.3"L x 5.9"W x 2.5"H
  • EYE XO2 with Bracket: 36.3"L x 5.9"W x 4.3"H
  • Hitting Zone: 28"W x 21"L (Fixed Hitting Zone)


Carl's Place C-Series DIY Enclosure Specifications:

  • 7.7' x 10' (4:3): Overall 124.8"W x 95.8"H x 59.125"D, Viewable Screen 110.8"W x 83.1"H (138.5" Diag.)
  • 7.7' x 13' (16:9): Overall 163.3"W x 95.8"H x 59.125"D, Viewable Screen 149.3"W x 84.0"H (171.3" Diag.)
  • 8' x 8' (1:1): Overall 100"W x 100"H x 59.125"D, Viewable Screen 86.0"W x 86.0"H (121.6" Diag.)
  • 8' x 10.5' (4:3): Overall 130.3"W x 100"H x 59.125"D, Viewable Screen 116.3"W x 87.2"H (145.4" Diag.)
  • 8.5' x 11.5' (4:3): Overall 140.3"W x 107.5"H x 59.125"D, Viewable Screen 126.3"W x 94.7"H (157.9" Diag.)
  • 9' x 12' (4:3): Overall 146.3"W x 112"H x 59.125"D, Viewable Screen 132.3"W x 99.2"H (165.4" Diag.)
  • Footprint Depth: the rear backset fitting adds 8.25", for a total footprint depth of 67.375"
  • Framing: Pipe Framing Kit (pre-cut 1" EMT) and Foam Insert Kit included, no pipe to source


SIG Enclosure Specifications:

  • SIG8 (1:1): Overall 8'4"W x 8'4"H x 5'D, Viewable Screen 7'7"W x 7'7"H (10'8" Diag.)
  • SIG10 (4:3): Overall 10'10"W x 8'4"H x 5'D, Viewable Screen 10'1"W x 7'7"H (12'7" Diag.)
  • SIG12 (4:3): Overall 12'2"W x 9'4"H x 5'D, Viewable Screen 11'5"W x 8'7"H (14'3" Diag.)


Buffer Space: Allow a minimum of 2"-3" between the top of your enclosure and the ceiling, and 2"-3" between each side of the enclosure and the side walls, so the enclosure can be assembled with ease.


BenQ AK700ST Projector Specifications:

  • Brightness: 4000 ANSI lumens
  • Resolution: 4K UHD (3840 x 2160)
  • Selectable Aspect Ratios: 16:9, 16:10, 4:3
  • Throw Ratio: 0.69-0.83
  • Zoom Ratio: 1.2x
  • Light Source: Laser, 20,000 hrs
  • HDMI: 2 (HDMI 2.0b/HDCP2.2)
  • Projection System: DLP


BenQ AK800ST Projector Specifications:

  • Brightness: 5000 ANSI lumens
  • Resolution: 4K UHD (3840 x 2160)
  • Selectable Aspect Ratios: 16:9, 16:10, 3:2, 4:3, 5:4, 1:1
  • Throw Ratio: 0.69-0.83
  • Zoom Ratio: 1.2x
  • Light Source: Laser, 20,000 hrs
  • HDMI: 3 (HDMI 2.1/HDCP 2.3)
  • Projection System: DLP


BenQ AK900ST Projector Specifications:

  • Brightness: 6000 ANSI lumens
  • Resolution: 4K UHD (3840 x 2160)
  • Selectable Aspect Ratios: 16:9, 16:10, 3:2, 4:3, 5:4, 1:1
  • Throw Ratio: 0.81-0.89
  • Zoom Ratio: 1.1x
  • Lens Shift: Vertical +/-60%, Horizontal +/-23%
  • Light Source: Laser, 20,000 hrs
  • HDMI: 3 (HDMI-1 and HDMI-2 are HDMI 2.1/HDCP 2.3)
  • Projection System: DLP


Crimson Projector Ceiling Mount with Extension Bar:

  • Included: Ceiling Mount with 6"-11" Extension Bar, JR3 Universal Adapter, Security Hardware, Pre-Sorted Hardware Pack
  • Weight Capacity: 70 lbs (31.8 kg)
  • Drop Length: 6"-11", adjustable in 1" increments
  • Adjustment: Pitch ±15°, Roll ±8°, Rotation (Yaw) 360°
  • Max Mounting Pattern: 13.8" (351.5 mm) diameter
  • Cable Management: Through-column cable routing
  • Mounting Surface: Wood joist, structural wood, or structural concrete (HE4 accessory required)
  • Finish: Black, scratch-resistant epoxy powder coat
  • Model Number: JKR3-11A


Flooring Specifications:

  • EZTee Hybrid Hitting Turf: 5' x 8' or 5' x 10', 1 1/8" pile height, real tee compatible
  • Money Putt Landing Pad: nylon, 3/8" pile, 1/2" total height, stimpmeter 9-10
  • IGO Single-Level Golf Simulator Putting Turf: IGO Local Muni Putting Turf over interlocking 10" x 10" plastic floor tiles with a flush IGO Local Muni Hitting Strip
  • IGO Single-Level Turf Depth: 15', cut wider than the enclosure interior so it covers wall to wall
  • IGO Single-Level Cups: 2 regulation cups, 12" from the screen and 18" off the centerline
  • IGO Single-Level Finished Height: approximately 1.25" installed


Computer Specifications (With Computer option):

  • SurfThing SG3-5702 Processor: Ultra 5 225F
  • Graphics Card: RTX 5070 12GB GDDR7
  • Memory: 32GB DDR5 6000MHz
  • Storage: 2TB NVMe Gen4 SSD
  • Operating System: Windows 11 Home
  • Wireless: Bluetooth 5.3, WiFi 6E
  • Touch Screen Guru 27" FHD: 1920 x 1080 @ 60Hz, 500 cd/m², 10-point projected capacitive touch, VESA 100 x 100 mm, 3 year warranty

Requirements

EYE XO2 Launch Monitor Space Requirements:

Uneekor EYE XO2 launch monitor space requirements.

EYE XO2 Launch Monitor Minimum PC Specifications:

  • AMD: 3rd gen Ryzen or higher and AMD Ryzen 3600X or higher (AMD 2700 is not compatible)
  • Not compatible with MacOS
  • Intel i5 8400
  • 8 GB RAM (16 GB RAM for Swing Optix)
  • GeForce GTX 1060
  • Operating System: Windows 10 (64 bit) Version 1803 or higher
  • Integrated Ethernet port required
  • 25Mbps internet connection required


No Computer Option: If you select No Computer, you will need a Windows PC that meets the EYE XO2 requirements above.

FAQ

Q: What is included with the Uneekor EYE XO2 All-In Golf Simulator Package?
A: Uneekor EYE XO2 Launch Monitor, (2) Uneekor Swing Optix Cameras, (2) Tripods, 1 Year of AI Trainer (Limited Time Only), your choice of Carl's Place C-Series DIY Golf Simulator Enclosure Kit with Premium Impact Screen (7.7' x 10', 7.7' x 13', 8' x 8', 8' x 10.5', 8.5' x 11.5' or 9' x 12'), or SIG8, SIG10 or SIG12 Golf Simulator Enclosure (Premium), Carl's Place Pipe Framing Kit and Carl's Place Foam Insert Kit (with every Carl's Place enclosure size), choice of BenQ AK700ST, AK800ST or AK900ST 4K Short Throw Laser Golf Simulator Projector, Crimson Projector Ceiling Mount with Extension Bar (6"-11"), AOC Locking HDMI 2.1 8K 60Hz Projector Cable (32'), 3 Month Ultimate Package Trial, your choice of flooring: EZTee Hybrid Hitting Turf in 5' x 8' or 5' x 10' with Money Putt Landing Pad, or IGO Single-Level Golf Simulator Putting Turf, and optionally the SurfThing SG3-5702 Golf Simulator Computer and Touch Screen Guru 27" FHD 24/7 Touch Screen Monitor (With Computer option).

Q: Which enclosure should I choose?
A: The six Carl's Place C-Series DIY sizes come fully framed with the Pipe Framing Kit and Foam Insert Kit, and cover 4:3, 16:9 and 1:1 screens. The SIG8, SIG10 and SIG12 use color-coded push pin poles and connectors. Compare the Overall Enclosure Dimensions in the Specifications section with your room, and allow 2"-3" of buffer space above and on each side of the enclosure.

Q: What is the difference between the two flooring options?
A: EZTee Hybrid Hitting Turf with a Money Putt Landing Pad gives you a hitting mat and a landing and putting strip in front of the screen. The IGO Single-Level Golf Simulator Putting Turf is a complete, flush floor: IGO Local Muni Putting Turf over an interlocking tile base with the IGO Local Muni Hitting Strip set into the surface and two regulation cups, custom-cut to fit your enclosure wall to wall.

Q: Do I need a computer?
A: Select With Computer to add the SurfThing SG3-5702 Golf Simulator Computer and the Touch Screen Guru 27" touch screen. If you select No Computer, you will need a Windows PC that meets the EYE XO2 requirements listed in the Requirements section.

Q: What software is included?
A: Your package includes Uneekor's VIEW Software, which comes with the EYE XO2. A 3-month Ultimate Package trial also comes with the launch monitor. 1 Year of AI Trainer is also included for a limited time.

Q: Does the EYE XO2 require marked golf balls or club stickers?
A: The EYE XO2 works with any golf ball, no markings required. EYE XO2 Club Stickers are required for club data measurement.

Q: How far away should I stand from my impact screen?
A: For the safety of both the golfer and the screen, we recommend standing a minimum of 10'-12' away from the screen.

Q: Where and how should I mount my projector?
A: Each BenQ projector option is ceiling mounted with the included Crimson Projector Ceiling Mount with Extension Bar (6"-11"). Placement depends on your viewable screen dimensions and the projector's throw ratio (0.69-0.83 for the AK700ST and AK800ST, 0.81-0.89 for the AK900ST), so reach out to our team and we will provide the exact mounting location for the enclosure you choose.

Q: How long does it take to assemble the enclosure?
A: Assembly time for a Carl's Place DIY Golf Simulator Enclosure Kit is about an hour, depending on size and whether you have a helper. For guidance, refer to the assembly video and manuals in the Resources section.

Resources

Documents:


Videos:

Speak with a Golf Simulator Expert

We understand that designing the perfect golf simulator can be a complex task. Get in touch with one of our Golf Simulator Experts for a free consultation, or to address any questions that you might have.

Customer Reviews

Search