Carl's Place DIY Golf Simulator Enclosure Projector Package

What Makes a Carl's Place DIY Golf Simulator Package the Right Fit For Your Setup?

The Carl's Place DIY enclosure is our recommendation for golfers who want a full-size simulator bay while putting more of the budget toward the launch monitor - you build the frame, and the kit supplies everything that turns it into a hitting bay.

The kit includes the BlackStop enclosure, steel corner fittings, and ball bungees with zip ties, and the frame is built from 1-inch EMT sourced locally or added as the pre-cut Pipe Framing Kit. A borderless bottom gives you a seamless turf-to-screen look, and assembly takes about an hour.

With six sizes from 8'W x 8'H up to 13'W, all at a standard 5' depth, it is the enclosure we point people to when the simulator is going into a garage, basement, or spare room.

Best-Selling Carl's Place DIY Golf Simulator Packages

Every package below pairs the same Carl's Place DIY enclosure with a different launch monitor. Want a heavier frame and deeper sizes? See the Carl's Place Pro golf simulator packages, or compare launch monitors and short throw projectors on their own. Here are some of the most popular builds.

ProTee United VX Launch Monitor Carl's Place DIY Golf Simulator Enclosure Projector Package

The ProTee United VX measures all relevant ball and club data with a shot delay under 0.2 seconds, and it reads the clubs and balls you already own with no specially marked balls or club stickers. This package pairs it with the Carl's Place C-Series DIY enclosure kit in your preferred size and your choice of BenQ, LG, Epson, or Optoma projector.

Uneekor EYE XO2 Launch Monitor Carl's Place DIY Golf Simulator Enclosure Projector Package

The EYE XO2 is an overhead launch monitor with three high-speed cameras and near-instant response times for live ball and club data. Its hitting zone is twice the size of the original EYE XO, so left and right-handed golfers can play without recalibrating, and it connects with popular third-party golf software.

TruGolf APOGEE Launch Monitor Carl's Place DIY Golf Simulator Enclosure Projector Package

APOGEE is TruGolf's overhead, camera-based launch monitor, measuring club and ball data without specialty marked balls or clubs and replaying impact in slow motion after each shot. Its Laser Launch Pad shows you exactly where to place the ball, and Instant Impact vision algorithms deliver virtually no shot delay.

Rapsodo MLM2PRO Launch Monitor Carl's Place DIY Golf Simulator Enclosure Projector Package

An affordable, portable way into a full DIY bay: the MLM2PRO combines two cameras with Doppler radar, supports up to 5 players, and pairs with Apple and Android devices. It sits 6.5'-8.5' directly behind the ball, so plan for about 14.5' of total room depth, and spin numbers require Callaway RPT or Titleist RCT golf balls.

Why Indoor Golf Outlet is the #1 Choice for a Carl's Place DIY Golf Simulator Package Online

We don't just sell you a Carl's Place DIY golf simulator package - we help you pinpoint the perfect equipment for your budget and space, without ever pushing you towards a specific model.

Our team will walk you through launch monitor compatibility, room sizing, frame assembly, and software selection, so you never feel left on your own. You'll also get the best deal online, guaranteed, thanks to our price-matching policy.

Shop with us for the confidence that you're getting both the best equipment and the best service in the industry. Reach out for a personalized Carl's Place DIY golf simulator package recommendation.

Frequently asked questions

What sizes does the Carl's Place DIY enclosure come in?

Every package is available in six sizes, all with a standard 5' depth: 8'H x 8'W, 7.7'H x 10'W, 8'H x 10.5'W, 8.5'H x 11.5'W, 9'H x 12'W, and 7.7'H x 13'W. Check the Specifications tab on each package to confirm the overall enclosure dimensions for your size will suit your space.

What do I need to build the enclosure frame?

The DIY enclosure frame is built from 1-inch EMT (electrical metal tubing), which has a true outer diameter of 1.163". Source it from your local hardware store or add the pre-cut Pipe Framing Kit for DIY Golf Simulator Enclosure to your order. Assembly takes about an hour, depending on size and whether you have a helper.

How much space do I need around the enclosure?

Allow an absolute minimum of 2"-3" of buffer space between the top of the enclosure and your ceiling, and subtract 4"-6" from your available width to leave 2"-3" of clearance on each side. The frame's footprint extends about 1' behind the screen, and we recommend standing a minimum of 10-12 feet from the impact screen.

Which impact screen and projector should I choose?

Each package offers a Premium or High-Contrast Gray Golf Impact screen, plus a choice of 15 short throw and ultra short throw projectors from BenQ, LG, Epson, and Optoma. Pick a 4K model such as the BenQ AK700ST, LG ProBeam BU53RG, or Optoma UHZ35ST for the sharpest image, or a 1080P model to keep the budget down.

What is not included in a Carl's Place DIY golf simulator package?

Each package includes the launch monitor, the Carl's Place DIY Golf Simulator Enclosure Kit, and your chosen projector. The Pipe Framing Kit, Foam Insert Kit, Safety Baffle, Back Cover Kit, Back Cover Pipe Kit, Net Wall Extensions, Hitting Mat, Putting Turf, Projector Mount, and Gaming PC or Laptop are sold separately.